X100+ INFLATABLE HIGH-PRESSURE DROPSTITCH FLOOR 2-PERSON TOURING KAYAK

Réf :
8511866
Product plus point
A sturdy inflatable canoe/kayak with high-pressure Dropstitch floor and two raised adult seats for good paddling comfort.A good compromise between stability and performance.
Users reviews
4.23 / 5 220 ratings

User benefits

Volume
For 1 to 2 people, up to a maximum of 150 kg (331 lbs).
Easy assembly / dismantling
Inflates in 8 minutes with a dual action hand pump.
Stability
Side tubes and a wide inflatable floor for good stability.
Glide performance
The bow shape gives the kayak good glide performance.3 keels.
Sitting comfort
Raised seat for comfort when at rest and when paddling.
Durability
Dropstitch floor.Tarpaulin side tubes with pressure relief valves
Quick drying
Its tarpaulin construction allows faster drying.

Technical card

Composition
Bladder : 80.0% Polyester, Bladder : 20.0% Polyvinyl Chloride Floor mat : 80.0% Polyester, Floor mat : 20.0% Polyvinyl Chloride - Phtalate Free Carry bag : 100.0% Polyester
Approved by
ISO 6185-1 standard. Category IIIB (beach craft) Complies with French Division 240 regulations (sailing up to 300 m from shelter)
Warranty
Availability of spare parts essential to the use of the product:2 years
Download user manual link

Tips

Storage advice
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.
Use restriction
Navigation up to 300 meters from shelter

Features

Technical dimensions and weights.
INFLATED SIZE Length: 365 cm Width:103 cm FOLDED & BAGGED SIZE Height:67 cm Width:40 cm Thickness:30 cm Weight:16 kg Maximum floor pressure:0.34 bar (5 psi) Side tube and seat pressure:0.2 bar (3 psi) Number of seats:1 or 2 seats Content:kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap. PUMP NOT INCLUDED For use with an Itiwit double-action hand pump with adapters
Inflation tips and floor positioning
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi.Finish by screwing the cap back on. Put the floor inside the kayak and strap it at the ends.The floor valve must be aligned with the side tube valves located at the back of the kayak.The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Side tube and seat inflation tips
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi.Finish by screwing the cap back on.Each side tube has a pressure relief valve.Its purpose is to evacuate excess air resulting from over-inflation.When this happens, you may notice a hissing sound.This hissing sound is normal, it can also occur during prolonged exposure to the sun.It will stop once the kayak reaches the correct internal pressure.
Seat comfort and positioning.
The seats are high, providing increased comfort for adults in the paddling position. Position the seats on the floor using the velcro areas located under the seat and on the floor. Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck. The boat is ready to be launched.
Glide performance
Thanks to the stiffness of the Dropstitch floor
Maintenance advice
Remove the seats and slightly deflate the floor to make it easier to rinse out. Rinse the kayak, bottom and seats with clean water after each use to avoid damage from sand, salt water and sun. Open the drain plugs located in the middle of the kayak and at the rear.Tip the kayak to empty out the water.
Disassembly & folding
Make sure that the surface you intend to fold the kayak on is clean. Remove the fins. Deflate the side bladders.The valves are located at the back of the kayak.WARNING:Do not unscrew the pressure relief valves at the front. Fold the floor. Fold the rest of the kayak in half lengthwise.Flatten the front fin base. Lay the rolled floor on the front end.Roll the kayak to the rear end. Strap the kayak.
Storage
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes. The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.
After-sales service
Spare parts are available for Itiwit X100+ kayaks from after-sales service.Visit the workshop at your nearest Decathlon store to collect or order some. Dropstitch floor:8561068 Pressure relief valve:8561069 Carry bag:8561073 Paddle rip-tab:8561070
Directions for use.
We recommend that you practice with a buoyancy vest.

Users reviews

4.23 / 5 220 ratings
194 users recommended this product

At Decathlon, reviews are reliable.

  • 06 March 2021
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    api.label.reviewFlag.checkedPurchase.title
    X10O

    Haven't used this kayak yet but it looks-well made can't wait to get it out on The water

  • Man
    24 December 2020
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    Not worth the money

    First of all it doesn't come with pump or paddles which adds up. For the price you think they would be included. You need a different pump for the seats. For the price it's definitely not robust either as I got a small pin hole on second day out. Only good thing about this is the hard floor. I ended up returning.

  • Man
    30-39 years old
    20 November 2020
    Use since 1 week or less
    That review has been deposited on this product version
    Customer service amazing and kayak also excellent

    I dealt with Raymond at the Central store in HK and i was blown away by the helpful service. It was amazing, from the kayak advice to the help with delivery. He was so helpful and his recommendation of the X100 was definitely correct. I took i took it out for it's first voyage and it was truly easy to use and performed brilliantly. Thoroughly recommend both Decathlon and the kayak!

HAUT DE PAGE