X100+ Inflatable High-Pressure Drop Stitch Floor 2-Person Touring Kayak

Réf :
8511866
Product plus point
A sturdy inflatable canoe/kayak with high-pressure Drop Stitch floor and two raised adult seats for good paddling comfort. A good compromise between stability and performance.
Users reviews
3.95 / 5 43 ratings

User benefits

Volume
For 1 to 2 people, maximum 150 kg (331 lbs).
Easy assembly / dismantling
Inflates in 7 minutes with a dual action hand pump.
Stability
Side tubes and a wide inflatable floor for good stability.
Glide performance
The bow shape gives the kayak good glide performance. 3 keels.
User comfort
Raised seat for comfort when at rest and when paddling.
Durability
Drop Stitch floor. Tarpaulin side tubes with pressure relief valves

Technical card

Composition
Bladder : 80.0% Polyester (PES), Bladder : 20.0% Polyvinyl chloride (PVC) Floor mat : 80.0% Polyester (PES), Floor mat : 20.0% Polyvinyl chloride (PVC) - Phtalate free Carry bag : 100.0% Polyester (PES)
Approved by
Standard ISO 6185-1
Warranty
Availability of spare parts essential to the use of the product: 2 years
Download user manual link

Tips

Storage advice
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.
Use restriction
Do not leave inflated in direct sunlight: risk of overinflation.

Features

Technical specifications
INFLATED SIZE Length: 360 cm Width: 102 cm FOLDED & BAGGED SIZE Height: 67 cm Width: 40 cm Thickness: 30 cm Weight: 16 kg Maximum floor pressure: 0.34 bar (5 psi) Side tube and seat pressure: 0.2 bar (3 psi) Number of seats: 1 or 2 seats Content: kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap. PUMP NOT INCLUDED For use with an Itiwit double-action hand pump with adapters
Inflation tips and floor positioning
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi. Finish by screwing the cap back on. Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Side tube and seat inflation tips
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi. Finish by screwing the cap back on. Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from over-inflation. When this happens, you may notice a hissing sound. This hissing is normal, it can happen during inflation or after prolonged exposure to sun. It will stop once the kayak reaches the correct internal pressure
Seat comfort and positioning.
The seats are high, providing increased comfort for adults in the paddling position. Position the seats on the floor using the velcro areas located under the seat and on the floor. Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck. The boat is ready to be launched.
Glide performance
Thanks to the stiffness of the Drop Stitch floor
Maintenance tips
Remove the seats and slightly deflate the floor to make it easier to rinse out. Rinse the kayak, bottom and seats with clean water after each use to avoid damage from sand, salt water and sun. Open the drain plugs located in the middle of the kayak and at the rear. Tip the kayak to empty out the water.
Disassembly & folding
Make sure that the surface you intend to fold the kayak on is clean. Remove the fins. Deflate the side bladders. The valves are located at the back of the kayak. IMPORTANT: Do not unscrew the pressure relief valves at the front. Fold the floor. Fold the rest of the kayak in half lengthwise. Flatten the front fin base. Lay the rolled floor on the front end. Roll the kayak to the rear end. Strap the kayak.
Storage
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes. The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.
After-sales service
Spare parts are available for Itiwit X100+ kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to pick up or order some. Drop Stitch floor: 8561068 Pressure relief valve: 8561069 Carry bag: 8561073 Paddle rip-tab: 8561070

Users reviews

3.95 / 5 43 ratings
34 users recommended this product

At Decathlon, reviews are reliable.

  • Man
    40-49 years old
    24 June 2019
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    Itiwit +100 inflatable kayak

    Like to start off with, I've had dozens of kayaks and inflatable boats over the years. Some were too heavy or not stable or folded in the middle, were a night mare to dry off or very slow on the water. I bought this to solo paddle but it does take two. Perhaps not my size at 6'8" and 23 stone. Oen my own this is great. This is a fantastic inflatable kayak, super stable, very manouvreable but also tracks straight readily. Its light enough to carry easily on your own either on your head or with a carry strap, not provided, when inflated. There are four handles, front and rear and on both sides. Its appearance doesnt give the impression but kayak glides well, I put it down to the drop stitch high pressure floor. It took me about ten minutes from getting the kayak out of the bag and onto the water and the bag is easy to carry and store. Get a good pump though. Not quite as easy to get it all back in the bag and that was the only real negative. This wee kayak surprised me no end to the good, down a shallow river then out onto Lake Windamere it performed great. Would recommend this over and over.

  • Man
    30-39 years old
    27 May 2019
    Use since 2 to 8 weeks
    That review has been deposited on this product version
    buyer beware! 2 different pumps required!

    This should be a 4 or 5 star review, but because of one glaring issue I can't give it a higher rating. So they don't tell you this in the store, and maybe the employees just don't know, but their typical "kayak pump" doesn't attach to the sides and floor, so you have to use the SUP pump, but that pump doesn't come with the attachment to inflate the seats. The seats are made of a heavy duty rubber, which is good, but makes it really hard to manually inflate. It seems ridiculous that they would make a product that requires you to buy their proprietary pump separately, but then not have all the proper attachments for it. This seems like an easy fix as well. Very disappointing!
    I will say after some back and forth with the store they did give me a free pump for my seats though, so good job on customer service, after the fact.
    As far as the boat goes I took it out and set up took a surprisingly little amount of time, the boat tracks well and felt durable. I tried to see how much it would heel over, and it barely moved. I put in and took out a dock, so I don't know how it would manage with rocks or beach. The full rubber makes it easier to clean off and dry off for storage. I had to add my own painter, but the handles at the front back were sturdy enough to hold it.

  • Man
    30-39 years old
    31 July 2019
    Use since 1 week or less
    That review has been deposited on this product version
    Tolle Optik läuft top

    Boot läuft super Verarbeitung top bis auf die Klebereste die überall zu finden sind. Viele kleine sinnvolle Features angenehmer Rucksack beim Tragen. Kleines Manko zu zweit wenn man fährt und nur der Vordermann paddelt sehr drehfreudig

HAUT DE PAGE