Réf :
Product plus point
The double-action high-pressure pump is designed to easily inflate SUPs or kayaks to pressures of up to 20 PSI. DEFLATE mode can also be used to optimise the storage of the inflatable
Users reviews
4.34 / 5 41 ratings

User benefits

Ease of use
2 MODES mode 1: inflation (0-8 PSI) mode 2: pressurisation (8-20 PSI)
Can be used to inflate and deflate your inflatable
Parameter measurement
Built-in 3-20 PSI pressure gauge. Accurate from 3 PSI.
Ergonomic grip
Wide feet for maximum stability. Ergonomic handles for comfort.
Compact design
Clip-on hose for easy transport and storage.
Heavy-duty hose with rotating head to prevent disconnecting during inflation.

Technical card

Structure : 100.0% Polypropylene Handle : 100.0% Acrylonitrile Butadiene Styrene Main part : 100.0% Polyamide 6 Shaft : 100.0% Aluminium 6061 Tube/Valve connector : 70.0% Polyethylene Low Density, Tube/Valve connector : 30.0% Ethylene Vinyl Acetate Valve : 100.0% Neodyme
Availability of spare parts essential to the use of the product: 2 years


Storage advice
Attach the hose to the clips provided for this purpose for compact storage.
Use restriction
Follow the inflation instructions


Directions for use
1/ Stand on level and solid ground 2/ Check that the hose is attached on the INFLATE side 3/ Connect the hose to the inflatable 4/ Turn the orange ring to position 1 5/ Inflate the craft until it becomes difficult (approx. 8 PSI) 6/ Turn the orange ring to position 2 7/ Finish inflating to the recommended pressure. Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT / black: other)
Storage advice
Use the 2 fastening clips to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand, it can damage the seals.
Technical dimensions
Height: 60 cm Width: 27 cm Depth: 12 cm Hose length: 100 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone. Pump weight: 1.2 kg Volume of air transferred: 1.6 litres on descent 1.4 litres on ascent 3 litres in total for each descent and ascent
Supplied with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: a "Mini Boston" adapter to inflate the kayak seats a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. A nozzle adapter to inflate certain kitesurfing wings.

Users reviews

4.34 / 5 41 ratings
35 users recommended this product

At Decathlon, reviews are reliable.

  • Man
    07 September 2020
    Use since 1 week or less
    That review has been deposited on this product version
    Absolut empfehlenswert!

    Ich habe die Pumpe gekauft weil die ich zu meinem SUP Board beigelegt bekommen habe kaputt gegangen ist. Mit der alten Pumpe musste ich Pausen einlegen bis ich das Board voll aufgepumpt habe. Mit dieser Pumpe geht es in einem Zug ohne Mühe.
    Lieferzeit: bei der Bestellung waren 9 Tage angegeben. Geliefert wurde schon am 5. Tag um 8 Uhr früh!

  • Man
    30-39 years old
    10 March 2021
    Use since 3 to 6 months
    That review has been deposited on this product version
    Super Pumpe! Leichtgängig. Leider etwas sperrig.

    Mir gefällt die Pumpe gut. Ich hatte auch zuerst die etwas günstigere orange Pumpe und diese hier gefällt mir noch besser. Schade nur, dass der Fuß oder der Griff (oder beides) nicht demontierbar ist. Dann würde sie noch besser im X500 Kajak verstaubar sein. Daher nur 4 Sterne.

  • 14 December 2020
    Use since 3 to 6 months
    That review has been deposited on this product version
    Tolle SUP Pumpe

    Hatte auch das Vorgängermodell aber diese Pumpe ist deutlich besser, hier wurden einige Probleme die es beim Vorgänger gab verbessert, besonders was den Schlauch angeht.