Réf :
Product plus point
A 14' x 25” inflatable Stand Up Paddle board semi-rigid bow and tail for greater speed. Perfect for practising, compact for travelling and competing.

User benefits

Glide performance
Streamlined. Tensioning stringer. Semi-rigid pointed nose. Square tail
Narrow (25") and solidified by a stringer for a good speed/stability balance.
Compact design
Dimensions folded in the bag (75x45x30 cm). Inflates to 17 psi in 8 minutes
Polyethylene stringers on and under the board for greater inflated rigidity.
Sturdy repairable & resistant reinforced dropstitch and glued PVC construction .
Easy transport
13 kg. Transport backpack, 3 large handles. An elastic bottle holder.
User comfort
Grooved foam deck for comfort and grip
Ease of learning
Placement markers on the SUP to help you progress

Technical card

Main fabric : 70.0% Polyvinyl chloride (PVC) - Phtalate free, Main fabric : 30.0% Polyester (PES) Foam : 75.0% Polyéthylène (PE), Foam : 25.0% Ethylene Vinyl Acetate (EVA) Carry bag : 100.0% Polyester (PES)
Used during the Dordogne Intégrale 2018 Race: long distance SUP & Kayak river race covering 130km in one day.
Designed for
Intermediate stand up paddle boarders for racing, suitable for users weighing up to 80 kg.
Availability of spare parts essential to the use of the product: 2 years
Download user manual link


Storage advice
Store deflated and flat out of sunlight, after removing the fin. If storing inflated, release some of the pressure and store in a flat position without any load.


Inflating & deflating the Stand Up Paddle
INFLATION To inflate your SUP, check that the valve is in the raised position (closed), so that air does not escape. Connect the pump. Inflate to 17 psi for best results. Disconnect the pump and close the outer plug. DEFLATION To deflate your SUP, push the valve in firmly, the air will escape. Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Maintenance tool
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY. If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided. If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Technical dimensions
INFLATED SUP: Length: 14' (427 cm) Width: 25" (63 cm) Thickness: 6" (15 cm) Volume: 290 litres Weight: 12.6 kg (+/- 10%) important: the dimensions can vary slightly depending on the inflated pressure. BAG CONTAINING THE FOLDED SUP: Height: 90 cm Width: 44 cm Thickness: 24 cm
Weight in use
This SUP board was designed and optimised for intermediate paddlers between 60kg and 80kg for good speed/stability balance. However, stability is a notion relative to one’s level and the conditions (flat water, sea, river, etc.). The weight is thus illustrative. Don't hesitate to ask to try out the product. For one person. the maximum recommended weight is 110 kg.
In the event of a hole in the structure, the SUP can be repaired using cuttable repair patches and high-pressure resistant MEK glue. We have a stand-up paddle board repair kit, reference 8512384.
Available through customer service and online in the event of breakage or loss. You can also upgrade your product with a SUP carbon racing fin reference 8545438

Users reviews

Write the first review

Post a review